We have a number of Plating Accessories available to aid your plating system and help to get even better results.
Head over to our Power supplies page to check out the different power supplies we have available.
Heating a solution will usually help speed up the plating or cleaning process. This heater can be used in all our plating tanks. It is fully thermostatic as the temperature can be set from 20°C to 34°C and can be used in tanks with a capacity up to 50 litres.
Air Agitation Pump:
Agitation helps when it comes to effective and efficient plating. Using an air pump is an easy solution to agitation and saves you from standing there, shaking your parts around for hours. This Air pump is a dual output pump with 2 x 1 metre of air pipe. The output is 3.5 litres per minute and it can run two air stones for lots of bubbles, an air stone and a tank filter or just the twin pipe. It is ideal for use with small to mid-sized plating tanks up to a capacity of 30 litres.
Ceramic Air Stone:
These air stones can be used in conjunction with the air pump to provide a more even stream of bubbles and agitation.
Plating Tank Filter:
The plating tank filter is used on one of the air pump outputs to slowly filter the electrolyte. It will filter the solution constantly while the air pump is on, providing agitation and trap small particles within the foam filters thus reducing the amount of pitting on the plating.
This current controller can be used with any non-variable 12v power supply. It is variable to give ease of current adjustment while plating various sized items and can be used with any of our plating kits. It means that you can get great results without the need for an expensive power supply as a battery charger or a 12v battery can be used.
Fume Control Balls:
For use in our 5L tanks, these balls float on the surface of the electrolyte to reduce fumes by preventing bubbles and condensing liquid in rising gasses.