5L Kit Contents

• Chemicals: bronze electrolyte chemicals 5L, dry acid pickle salts 250g, GP1 alkaline cleaner 250g
• Electrical Connector: bronze anodes, copper wire, blue and brown wire, crocodile clips, current controller
• Accessories: tank heater, guide, 5L tank, gloves, googles

10L Kit Contents

• Chemicals: bronze electrolyte chemicals 10L, dry acid pickle salts 500g, GP1 alkaline cleaner 500g
• Electrical Connector: bronze anodes, copper wire, blue and brown wire, crocodile clips, current controller
• Accessories: tank heater, guide, 10L tank, gloves, googles

Ultimate Kit Contents

• Chemicals: bronze electrolyte chemicals 10L, dry acid pickle salts 500g, GP1 alkaline cleaner 500g
• Electrical Connector: bronze anodes, extra copper wire, blue and brown wire, crocodile clips, current controller
• Accessories: guide, 10L tank x3, tank heater, electrolyte circulation pump, gloves, goggles

Power supply if selected

• Longwei 10A precision variable power supply

Note:

Current controller, blue and brown wires are not included if power supply option is added. 

If using the current controller you will need a DC power source to power the process.

You will also need distilled or deionised water to make up the electrolyte chemicals.

Our kits include two cleaning chemicals, our own Alkaline Cleaner formulation and an Acid Pickle. The GP1 Alkaline Cleaner can be used two ways: as a soak cleaner or an electrolytic cleaner. Using it as a soak cleaner, you would submerse you part in the solution to remove soils such as grease, oils and rust preventetives. If using electrolytically, it can be used to remove rust. Guides on how to do both are included in the kit. The acid pickle is also a cleaner but is vital in preparing the metal before plating. Submersing your item in the acid pickle removes some soils but more importantly slightly etches the surface, removing any oxides, giving a pristine surface ready for plating.

This kit contains chemicals that are classed as hazardous, so please check out over the safety data sheets and contact us if you have any questions. As the chemicals are hazardous, we use a specialist courier that is able to carry parcels that are labelled as LQ (limited quantity [hazardous]). Buyers from outside the UK should contact us as we are unfortunately unable to send to some countries. For estimated shipping costs and more information, head over to our Policies page.

When using this kit to apply a decorative, thin flash layer, make sure to have a polished surface of ideally bright nickel or replica chrome. This way, the plated layer will produce a high lustre bronze colour. When heavier plates are wanted, the bronze deposits as a matte finish and will require polishing to achieve the best finish or can be rubbed or highlighted to give an antiqued finish. This kit can be used to plate on top of base metals of: brass, copper, nickel, replica chrome, steel, iron and lead castings.