They are cut from a high purity, C106 grade phosphorous deoxidised copper sheet. This will give enough to plate approximately 15,000 cm^2 at a thickness of 25 microns. They are pre-drilled and ready for use.

Approx Dimension: 150 mm x 85 mm x 2 mm Approx Weight: 450 g

For copper electroforming or plating, the minimum amount of copper sludge is formed when using an anode to cathode ratio of 1:1 - 2:1. Below a 1:1 ratio when the surface area of the item is larger than the surface area of immersed anode, the anode film that is formed will become passive. This leads to a break in the circuit due to no current being able to pass through the passive film. Clean the anodes if this happens.

If you need any additional information or safety data sheet please get in touch! We are more than happy to help.